For example, the DIGI-Wi-Fi module this must first be connected to an available Wi-Fi network. Please see the video here ( https://bit.ly/2UWy5SB) for a tutorial regarding DIGI-Wi-Fi programming. Please note: The Master Manager code allows access to all the options above. A ‘user code’ has access to the ‘User Menu’ which includes the functions: ‘OPERATE USER OUTPUTS’, ‘CHANGE CODE’, ‘REVIEW LOGS’, ‘WALK TEST’, ‘SIREN TEST’, ‘ALLOW ENGINEER MENU’, and ‘EXIT USER MENU’. A warning device (usually external) that is generally configurated to give audible and visual notification that the system has been activated. Your panel is designed to automatically inhibit certain functionality. The factory default settings are shown below:

The alarm panel constantly polls the PyronixCloud, if ProControl+ displays ‘panel is not polling’ there are a few initial steps that can be taken to try and reconnect. I arrive home, open my car window, press the remote "off" button ( nearer to the panel than the wireless garage PIR). The remote shows a green light telling me the signal has been sent (but not received?). I open the garage door, drive in, alarm sounds. When an area or level is disarmed, the panel will not react unless specifically programmed to do so. If SMS text is enabled, there will be up to 10 mobile numbers that can be programmed to send SMS alarms. Please discuss this feature with your engineer if required (THIRD PARTY SIM CARDS ONLY).When an area or level is armed, if an zone is triggered, the system will follow the appropriate (programmable) actions. Activates/deactivates user automation outputs that are used to remotely activate devices, such as electronic gates & lights. PLEASE NOTE: Any proximity tags that are to be used on a standalone tag reader must have flexi-set set to ‘No’. Press or to scroll to ‘EDIT USERS?’. Press Enter the new code or present a tag. Once ‘asterisks’ appear, the tag or user code will be now assigned to this user. Press . Advanced technology preserves the battery life of each wireless device. However, the system informs you when a battery needs replacing upto a month in advance before the device stops working. This key feature gives you enough time to change the battery in the specific device. Conventional wireless alarm systems may not give you a low battery warning signal, meaning that devices could stop working, leaving your environment unprotected.

After 30 key presses without entering a valid code, keys are disabled for 90 seconds. After reinstatement, this will be repeated after each 7 key presses until a valid code is entered. The control panel may be transmitting data to the PyronixCloud, wait a few seconds then try again. If the problem persists the panel may have lost connection to the Cloud, perhaps the internet connection is down. If the system is connected via Wi-Fi, the panel may have disconnected from the Wi-Fi network or the signal strength is too weak.This wireless alarm system has been engineered to be secure, reliable and easy to use. It includes the following features:

Button 8 Function Keyfob with Enforcer Two-Way Wireless Technology. The 4 buttons can be configured for single buttons and combining 2 buttons.PLEASE NOTE: For instructions on adding a key fob please refer to the manual provided with the product. Compliant operation is only guaranteed when installed and operated according to the relevant installation and user manuals. Receive notice via SMS text message or push notification of any incidents within your home in real time. This can be programmed to send in different situations such as: If you need to enter an international dialling code to send the key to a foreign SIM card, use the key to enter the ‘+’ symbol.

Advanced technology preserves the battery life of each wireless device. However, the system informs you when a battery needs replacing up to a month in advance before the device stops working. This key feature gives you enough time to change the battery in the specific device. Conventional wireless alarm systems may not give you a low battery warning signal, meaning that devices could stop working, leaving your environment unprotected. If an invalid tag is presented 6 times without a valid tag presented, the respective keypad or reader will be disabled for 90 seconds. After reinstatement, this state will be repeated after 2 invalid tags are presented to any reader. The fully two way wireless keyfob allows you to see the status of the control unit via three colour LEDs:Alarm activation: Notification that the alarm has been triggered, allowing you to monitor your home from anywhere in the world. Automatic door yes. If I turn the alarm off from the panel the garage PIR is deactivated. Same if I turn it off with the remote nearer the panel. But what's the point of a remote I can't use 30m from the panel?